KELL E M S ® WIRE M A N AG E ME N T P R O D U C TS Y SECTION Y-30 | www.hubbell.com/wiringdevice-kellems Dimensions in Inches (mm) Conduit Riser Grips Double Weave, Split Mesh, Lace Closing Kellems Conduit Riser Support Grips will support cable runs in vertical or sloping standard rigid conduit. The grip is fastened to a support ring which seats on the rim of the conduit. The entire grip is supported by the conduit itself and no other hardware is required. See page Y-32 for ring dimensions. The rings will fit schedule 40 rigid PVC conduit and standard electrical rigid metal conduit only. For permanent support when cable end is not available. IMPORTANT: Read all breaking strength, safety and technical data relating to this product. Refer to pages Y-33 and Y-34. IMPORTANT: Recommended safety factor is ten for catalog listed support grips. Suitable for Standard Electrical Rigid Metal Conduit and Schedule 40 Rigid PVC Conduit Only Cable Sizes In. (cm) .75"- .99" (1.90-2.51) 1.00"- 1.24" (2.54-3.15) 1.25"- 1.49" (3.17-3.78) 1.50"-1.74" (3.81-4.42) 1.75"- 1.99" (4.44-5.05) 2.00"- 2.49" (5.08-6.32) 2.50"- 2.99" (6.35-7.59) 3.00"- 3.49" (7.62-8.86) 3.50" -3.99" (8.89-10.13) Model RS075 RS100 RS125 RS150 RS175 RS200 RS250 RS300 RS350 Length In. (cm) 11" (27.94) 12" (30.48) 12" (30.48) 14" (35.56) 15" (38.10) 17" (43.18) 18" (45.72) 20" (50.80) 21" (53.34) Conduit Sizes Inches Catalog Number Approx. Breaking Strength Lbs. (N) 1-1/4 02212003 1,580 (7,028) — — — — — — — — 1-1/2 02212007 1,500 (6,672) — — — — — — — — 2 02212010 1,430 (6,361) 02212012 1,930 (8,585) 02212013 2,040 (9,074) — — — — — — 2-1/2 — — 02212017 1,910 (8,496) 02212018 2,040 (9,074) — — — — — 3 — — 02212023 1,780 (7,917) 02212024 1,890 (8,407) 02212025 2,520 (11,209) 02212026 4,300 (19,126) — — — 3-1/2 — — — — — 02212033 3,910 (17,392) 02212034 4,300 (19,126) — — 4 — — — — 02212040 2,110 (9,385) 02212041 3,530 (15,701) 02212042 3,820 (16,991) 02212043 5,380 (23,930) — 5 — — — — — — 02212061 2,860 (12,721) — — 6 — — — — — — — — 02212073 2,955 (13,144) Note: See page Y-37 for multiple cables in a single conduit riser grip.
