Wiring Device-Kellems ® W-11 Kellems® Wire Management Products Dimensions in Inches (mm) www.hubbell.com/wiringdevice-kellems/en M E Slack Grip-Closed Mesh, Offset Eye, Double Weave, Galvanized Steel Cable Diameter Range Inches (cm) Approx. Breaking Strength Lbs. Working Load Lbs. E Inches (cm) M Inches (cm) Catalog Number Standard .75"-.99" (1.90-2.51) 2,600 520 7" (17.78) 12" (30.48) 03308003 1.00"-1.24" (2.54-3.15) 4,000 800 8" (20.32) 15" (38.10) 03308004 1.25"-1.49" (3.17-3.78) 5,400 1,080 8" (20.32) 16" (40.64) 03308005 1.50"-1.74" (3.81-4.42) 6,600 1,320 8" (20.32) 20" (50.80) 03308006 1.75"-1.99" (4.44-5.05) 10,000 2,000 10" (25.40) 18" (45.72) 03308007 2.00"-2.49" (5.08-6.32) 11,000 2,200 10" (25.40) 19" (48.26) 03308008 2.50"-2.99" (6.35-7.59) 11,000 2,200 10" (25.40) 20" (50.80) 03308009 3.00"-3.49" (7.62-8.86) 14,500 2,900 12" (30.48) 21" (53.34) 03308010 3.50"-3.99" (8.89-10.13) 14,500 2,900 12" (30.48) 22" (55.88) 03308011 Note: E- Eye length. M-Mesh length at nominal diameter. See page W-18 for multiple cables in a single pulling grip. Non-Conductive Grips Kellems® Non-Conductive Pulling Grips, made of a high strength, non-conductive aramid fiber, are available for pulling single cable or cable bundles. Their braided double weave design adds strength and positive holding power. Non-Conductive Grips, Single Eye, Double Weave, Non-Metallic Cable Diameter Range Inches (cm) Approx. Breaking Strength Lbs. Working Load Lbs. E Inches (cm) M Inches (cm) A Inches (cm) Color Code Catalog Number .50"-.62" (1.27-1.57) 1,000 200 5.5" (13.97) 24" (60.96) .44" (1.12) Green 03628001 .63"-.74" (1.60-1.88) 2,000 400 5.5" (13.97) 26" (66.04) .44" (1.12) Yellow 03628002 .75"-.99" (1.90-2.51) 2,000 400 6.0" (15.24) 31" (78.74) .63" (1.60) Red 03628003 1.00"-1.24" (2.54-3.15) 3,000 600 6.5" (16.51) 36" (91.44) .63" (1.60) Blue 03628004 1.25"-1.49" (3.17-3.78) 3,000 600 6.7" (17.02) 41.5" (105.41) .63" (1.60) White 03628005 1.50"-1.99" (3.81-5.05) 3,000 600 8.0" (20.32) 44.0" (121.76) .63" (1.60) Pink 03628006 Note: E- Eye length. M-Mesh length at nominal diameter. Taping is required to guard against accidental release and to insure maximum reliability. Apply vinyl plastic electrical tape starting 2" to 3" (5.08cm to 7.62cm) from the tail of the grip onto 2" to 3" (5.08cm to 7.62cm) of cable. IMPORTANT: Read all breaking strength, safety and technical data relating to this product. Slack Pulling Grips Slack Pulling Grips are offered in three styles made of galvanized steel. The closed type is used when the cable end is accessible. When not accessible, there are split lace and split rod closing styles. All grips feature a single offset eye for easy attachment to a pulling line. M E A Benefits • Color coded for fast on-site selection • Extra flexibility for easy installation • Non-metallic mesh provides for safe pulls over “hot" areas • Pellethane jacketed aramid fiber mesh resists abrasion • Grips are corrosion resistant Benefits • Easy attachment to pulling lines • Galvanized steel for strength Refer to pages W-17 and W-18.