R SECTION F I R E - R AT E D P O K E -T H R O U G H S www.hubbell.com/wiringdevice-kellems | R-19 Complies with UL514A Dimensions in Inches (mm) 50/50 Device Plate Combination • Allows for up to eight Hubbell data jacks plus two 20A duplex receptacles • Two plates which can be wired independently 60/40 Device Plate Combination • Allows for up to twelve data/AV jacks plus a 20A duplex receptacle • Two plates which can be wired independently Left 50% Sub-Plates Description/Cat. No. Sub-Plate Description/Cat. No. Sub-Plate (3) Extron AAP plate openings, left side only S1R6SPA Blank cover plate, left side only S1R6SPB (5) Extron MAAP plate openings, left side only S1R6SPC (4) 1 unit Hubbell iSTATION openings, left side only (See section AA for modules) S1R6SPD (1) Style Line decorator and (2) Hubbell keystone openings, left side only S1R6SPE* (2) 1.5 unit Hubbell iSTATION openings, left side only (See section AA for modules) S1R6SPF (3) Extron MAAP openings and (2) Hubbell keystone jack openings, left side only S1R6SPL (1) Style Line decorator opening, left side only S1R6SPM (1) Decorator opening and (2) Ortronics® TracJack® openings, left side only S1R6SPN (2) Hubbell Jack openings and (4) Jack KOs with Label Field S1R6SP6DJ Right 50% Sub-Plates (1) Duplex device opening, right side only S1R6SPI (1) Style Line Decorator device opening, right side only S1R6SPK (1) 1.60" opening for 20A and 30A Twist-Lock®, right side only S1R6SPG (1) 1.40" opening for simplex or 15A Twist-Lock, right side only S1R6SPJ (4) 20A pre-wired receptacles; one or two circuits, right side only (Supplied with isolated ground sticker) S1R6SPH (16" leads) S1R6SPH25 (25 foot leads) (4) 20A pre-wired receptacles; 16" leads; one or two circuits, right side only; Marked with “ Controlled” S1R6SPHC4 (4 Controlled) S1R6SPHC2 (2 Controlled) (3) 20A pre-wired tamper resistant receptacles; one circuit, right side only (Supplied with controlled and isolated ground stickers) S1R6SP3RTR Note: *SubPlates must only be used for Data/AV. Do not mix with power devices. See page R-18 for covers and accessories Left 60% Sub-Plates Description/Cat. No. Sub-Plate Description/Cat. No. Sub-Plate (1) Extron® MAAP opening, (4) Extron MAAP openings, (1) Extron MAAP opening, left side only S1R6SPT* (2) MAAP and (2) AAP Extron openings, left side only S1R6SPU* (1) Style Line® decorator and (2) Extron MAAP openings, left side only S1R6SPV* (2) Style Line decorator openings, left side only S1R6SPW* (1) Style Line decorator and (2) Extron AAP openings, left side only S1R6SPX* (1) Style Line decorator and (2) 1.5 unit Hubbell iSTATION openings, left side only (See section AA for modules) S1R6SPY* Right 40% Sub-Plates (2) 20A pre-wired receptacles; 16" lead; one circuit, right side only (Supplied with isolated ground sticker) S1R6SPZ (2) 20A pre-wired receptacles; 25 foot lead; one circuit, right side only (Supplied with isolated ground sticker) S1R6SPZ25 (2) 20A pre-wired receptacles; 16" lead; one circuit, right side only (Supplied with isolated ground sticker); Marked with “ Controlled” S1R6SPZC Note: Sub-Plates can not be rotated to create additional layouts. When assembled, Sub-Plates cannot overlap. Custom plates available upon request and may be subject to minimum order quantity. *Sub-Plates must only be used for Data/AV. Do not mix with power devices. See page R-18 for covers and accessories. 6 Inch Sub-Plates, for Use In Concrete Floors SystemOne Recessed Extron® is a registered trademark of Extron Electronics. TracJack®, Series II® and Ortronics® are registered trademarks of Ortronics/Legrand.
