D I ST R I B U T I ON - CPI www.hubbell.com/cpi | J-19 Bolted WEJTAP™ Connectors - Aluminum CPI™ Shear Bolt WEJTAP™ Connectors with Captive Interface available with Optional Captive Shear Bolt 336.4 - 636 Medium Series Aluminum Tap CPI Aluminum Taps are designed for use as a permanent connection for aluminum and copper conductors. CPI wedge connectors use high strength aluminum alloy, pure aluminum and a unique shear head bolt for a mechanically strong, electrically conductive and easy to install connection. The new Captive Interface is now “held” by the connector to facilitate installation and eliminate the risk of the interface falling. The Captive Interface also allows for conductor side entry which simplifies the installation. Features and Benefits • The new Captive Interface is contained by the C Body so it cannot fall out during installation • The new Captive Interface allows conductor side entry which simplifies installation • Optional Captive Shear Bolt shears off at proper torque but stays connected to the bolt to limit loose components • Industry-proven spring wedge technology easily installed with common socket or impact wrench - No Special Tools Required! • “Spring Like” high strength C-Body ensures permanent connection with consistent pressure on the conductors • Meets or exceeds current carrying capacity of conductors being connected Not recommended for copper to copper applications, use copper Bolted WEJTAP™. Use a 3/4” socket to install and a 9/16” socket to remove the bolt. Catalog Number Conductor Standard With Captive Shear bolt Main Main Dia. Range Tap Tap Dia. Range 336222F 336222FCB 300 MCM, 336.4, 350 MCM, 397 ACSR 18/1 0.63”-0.743” #6, #4, #3 Cu 0.162”-0.292” 336104F 336104FCB 336.4, 350 MCM, 397 ACSR 18/1 0.666”-0.743” #4 ACSR, #2, 1/0 AAC 0.257”-0.368” 336012F 336012FCB 1/0, 2/0, 3/0 0.368”-0.502” 336866F 336866FCB 4/0 ACSR, 266.8 AAC 0.522”-0.592” 336718F 336718FCB 266.8 ACSR 36/7, 336.4, 397.5 0.642”-0.806” 477057F 477057FCB 397 ACSR, 24/7, 450 MCM, 477, 500 MCM, 556.5 AAC 0.769”-0.858” #6 AAC, #4, #2 0.162”-0.316” 477962F 477962FCB #2, 1/0 0.292”-0.398” 477853F 477853FCB 1/0 ACSR, 2/0, 3/0 AAC 0.398”-0.464” 477724F 477724FCB 3/0 ACSR, 4/0,250, 266.8, 300 AAC 0.502”-0.628” 477633F 477633FCB 266.8 ACSR 36/7, 300 AAC, 336.4 397.5 ACSR 24/7 0.628”-0.772” 477434F 477434FCB 336.4 ACSR 26/7, 397, 477, 500 MCM, 556 AAC 0.72”-0.858” 556956F 556956FCB 477 ACSR 26/7, 556, 600 MCM, 636 ACSR 18/1, 605 ACSR 0.856”-0.953” #6, #4, #2 0.162”-0.316” 556892F 556892FCB #2, #1, 1/0 0.292”-0.398” 556783F 556783FCB 1/0, 2/0, 3/0, 4/0 AAC 0.368”-0.52” 556638F 556638FCB 4/0, 250, 266.8, 300 MCM, 336 AAC, 350 MCM 0.522”-0.68” 556504F 556504FCB 350 MCM, 336.4, 397.5, 477 AAC 0.68”-0.806” 556294F 556294FCB 397 ACSR 30/7, 477, 500 MCM, 556.5, 636 AAC 0.795”-0.918” • Corrosion resistant highly conductive aluminum alloys with a pure aluminum insert between conductors increases conductivity and lowers electrical resistance • Corrosion inhibitor factory applied for ease of installation • Remains permanently locked through fault current or power surges • Easy to remove without damage to conductor • Excellent option for emergency restoration where outside crews might not have Shoot-On or compression tooling Optional Captive Shear Bolt
