DI ST RIBUTION - C P I J-18 | www.hubbell.com/cpi Bolted WEJTAPTM Connectors - Aluminum CPI™ Shear Bolt WEJTAP™ Connectors with Captive Interface, available with optional Captive Shear Bolt #4 - 350 Small Series Aluminum Tap CPI Aluminum Taps are designed for use as a permanent connection for aluminum and copper conductors. CPI wedge connectors use high strength aluminum alloy, pure aluminum and a unique shear head bolt for a mechanically strong, electrically conductive and easy to install connection. The new Captive Interface is now “held” by the connector to facilitate installation and eliminate the risk of the interface falling. The Captive Interface also allows for conductor side entry which simplifies the installation. Features and Benefits • The new Captive Interface is contained by the C Body so it cannot fall out during installation • The new Captive Interface allows conductor side entry which simplifies installation • Optional Captive Shear Bolt shears off at proper torque but stays connected to the bolt to limit loose components • Industry-proven spring wedge technology easily installed with common socket or impact wrench - No Special Tools Required! • “Spring Like” high strength C-Body ensures permanent connection with consistent pressure on the conductors • Meets or exceeds current carrying capacity of conductors being connected Not recommended for copper to copper applications, use copper Bolted WEJTAP™. Use a 9/16” socket to install and remove the bolt. Catalog Number Conductor Standard With Captive Shear bolt Main Main Dia. Range Tap Tap Dia. Range 640101F 640101FCB #6 0.162”-0.232” #6, #4 Sol 0.162”-0.204” 240100F 240100FCB #4, #2, #1 AAC 0.232”-0.328” #6, #4 Sol 0.162”-0.204” 240101F 240101FCB #4 0.232”-0.257” 240102F 240102FCB #2, #1 AAC 0.292”-0.328” 210103F 210103FCB #1 ACSR, 1/0, 2/0 AAC 0.354”-0.414” #6 ACSR, #4 AAC 0.198”-0.232” 210105F 210105FCB #4, #2, #1 AAC 0.232”-0.328” 210106F 210106FCB #1 ACSR, 1/0, 2/0 AAC 0.354”-0.414” 230107F 230107FCB 2/0 ACSR, 3/0 0.447”-0.502” #6 ACSR, #4 AAC 0.198”-0.232” 230108F 230108FCB #4, #2, #1 0.232”-0.354” 230110F 230110FCB #1 ACSR, 1/0, 2/0 AAC 0.354”-0.414” 230111F 230111FCB 2/0 ACSR, 3/0 0.447”-0.502” 264111F 264111FCB 3/0 ACSR, 4/0 250 AAC 0.502”-0.574” #6 ACSR, #4, #1 AAC 0.198”-0.328” 264113F 264113FCB #1 ACSR, 1/0, 2/0 AAC 0.316”-0.414” 264114F 264114FCB 2/0 ACSR, 3/0 0.447”-0.502” 264115F 264115FCB 4/0, 250 AAC 0.522”-0.574” 350117F 350117FCB 266.8 ACSR, 300 MCM, 336.4 AAC 336.4 ACSR 18/1, 350 MCM 0.609”-0.684” #6, #4 AAC 0.162”-0.232” 350118F 350118FCB #4 0.232”-0.257” 350119F 350119FCB #2, #1 AAC 0.292”-0.328” 350120F 350120FCB #1, 1/0 AAC 0.328”-0.368” 350121F 350121FCB 1/0 ACSR, 2/0 0.398”-0.447” 350122F 350122FCB 2/0 ACSR, 3/0 0.447”-0.502” 350123F 350123FCB 4/0, 250 0.522”-0.574” 350124F 350124FCB 266.8-19 AAC, 300 AAC, 266.8 ACSR 0.592”-0.642” 350125F 350125FCB 300 ACSR 0.665”-0.684” • Corrosion resistant highly conductive aluminum alloys with a pure aluminum insert between conductors increases conductivity and lowers electrical resistance • Corrosion inhibitor factory applied for ease of installation • Remains permanently locked through fault current or power surges • Easy to remove without damage to conductor • Excellent option for emergency restoration where outside crews might not have Shoot-On or compression tooling Optional Captive Shear Bolt
