O H D I ST R I B U T I O N A N D T R A N SMI SSI ON www.hubbell.com/burndy | J-15 Catalog Number KV/BIL Ratings Conductor Dia. Range Common Conductors Replacement Tap ACSR AAC WAD1015 15 kV/110 kV BIL 0.398” - 0.502” 1/0 (6/1), 2/0 (6/1), 3/0 (6/1) 2/0, 3/0 WADRT1 WAD1029 29 kV/150 kV BIL WAD1035 35 kV/200 kV BIL WAD4015 15 kV/110 kV BIL 0.522” - 0.609” 4/0 (6/1), 266.8 (18/1) 4/0, 250, 266.8 (7 Str. , 19 Str.), 336 compact WADRT1 WAD4029 29 kV/150 kV BIL WAD4035 35 kV/200 kV BIL WAD33615 15 kV/110 kV BIL 0.642” - 0.723” 266.8 (26/7, 30/7) 336.4 (18/1, 26/7) 336, 350, 397.5, 477 compact WADRT2 WAD33629 29 kV/150 kV BIL WAD33635 35 kV/200 kV BIL WAD47715 15 kV/110 kV BIL 0.741” - 0.814” 336.4 (30/7), 397.5 (All Str.), 477 (18/1) 477 (19 Str. , 37 Str.), 500 (19 Str. , 37 Str.), 556 compact WADRT1 WAD47729 29 kV/150 kV BIL WAD47735 35 kV/200 kV BIL WAD55615 15 kV/110 kV BIL 0.846” - 0.883” 477 (24/7, 26/7, 30/7), 556 (18/1) 556 (19 Str. , 37 Str.) WADRT2 WAD55629 29 kV/150 kV BIL WAD55635 35 kV/200 kV BIL WAD79515 15 kV/110 kV BIL 0.953” - 1.040” 556 (26/7, 30/7), 795 (36/1) 795 (37 Str. , 61 Str.) WADRT3 WAD79529 29 kV/150 kV BIL WAD79535 35 kV/200 kV BIL Voltage: Current: Short Circuit: Strength: Insulators: Meets Industry Standards: 15 kV (110 kV BIL), 29 kV (150 kV BIL), 35 kV (200 kV BIL) 900 Ampere RMS Momentary Current 40,000 Ampere RMS, Asymmetrical Three Second Current 25,000 Ampere RMS, Symmetrical Body 10,000 lbs. Pulling Eye 6,000 lbs. Silicone ANSI C119.4, C37.32 IEEE C37.30, C37.34 CSA C83.71 ASTM B117 Salt Fog Product Specifications 1. Utilizes WEJTAP™ connectors for securing the switch to the distribution line in tension applications. 2. Utilizes industry recognized and proven GST&D Products, LTD. blade components along with dual Advance Rubber Products, Inc., Insulators attached to a BURNDY® designed yoke plate assembly. 3. WEJTAP™ In-Line Disconnect designed for use in gloving and hot stick applications in conjunction with an industry standard load break tool. 4. Dual insulators minimize the switch movement during opening and closing of the blade. 5. Installation steps are minimized. The switch can be snapped directly on the line and secured with our conductor pivot retainer, designed into the switch frame. 6. WEJTAP™ tooling is used to secure the “C Member” to the built-in wedge feature of the frame. Providing reliable mechanical and electrical performance. 7. The blade is positioned on the switch to simplify cutting the conductor during installation. 8. In-Line Disconnect is removable and reuseable. 9. Other conductor sizes available. Please contact factory. WEJTAP™ In-Line Disconnect WEJTAP™ In-Line Disconnect The BURNDY® In-Line Disconnect utilizes proven WEJTAP™ technology in combination with industry standard components to provide reliable performace of switch applications.